Tips on Sharpening Your Chainsaw Blade using an Electric Sharpener

Did you know that if your Chainsaw Blade is not sharp or if it’s
not sharpened correctly, it will require a lot more energy from you? Well, no you know. Blunt chainsaw blades are harder through vibrations and will requir a lot of energy from the operator. By now, you are probably wondering what a chainsaw blade is?

Allow me to decipher!!

A chainsaw blade is a cutting tool that is designed with a circular chain. It is driven by a motor and the blade is made up of many interconnected sharp metallic teeth. It is a cutting tool that is used to cut through trees and sharpen the various wood blocks. A little knowledge on why you
need to sharpen your chainsaw blade will go a long way in understanding how to actually sharpen it.

Why you need to Sharpen your Chainsaw Blade

Here is why;

 

1.

If your chainsaw blade is bucking and burnin through the wood while cutting

 

2.

If your chainsaw blade is so slow

 

3.

It is dangerous to cut wood using a blunt chainsaw blade

 

4.

If you are using more energy than required to cut through wood using your chainsaw

 

5.

If the waste is dust instead of chips

 

With that said, it is now clear true you have to sharpen properly your chainsaw blade. So, how do you sharpen your chainsaw blade using
an electric sharpener?

 

How to Sharpen a

Chainsaw Blade using an Electric Sharpener

 

Let us quickly dive in!!

 

1.  Look at the specification of the blade: 

 

Before you start, first check the manufactures sharpening specifications on the user manual.

 

2.  Positioning the Chainsaw electric Sharpener

 

After a brief on the specifications, position the chainsaw blade sharpener on a firm rigid ground so as to minimize and avoid movement of
the blade while sharpening. Also position it, in a place where the chainsaw blade can be installed easily.

 

3.  Adjust the Swivle angle

 

Now you have your sharpener in position, place the chainsaw blade in the holder of the sharpener and then adjust the angle of the swivel. A common angle is from 00-600-800.

 

4.  Adjust the Blade Tooth Angle

 

Look at the blade tooth angle from the user manual of your
chainsaw blade and adjust it by loosening a knob on the blade holder.

 

5.  Adjust the depth stop

 

Adjust properly the depth stop to prevent the grinder of the
sharpener from cutting the metal between the teeth of your chainsaw blade.

 

6.  Start Sharpening your Chainsaw Blade

 

Now you are ready to start sharpening your chainsaw blade by
lowering slowly the grinder wheel on the first tooth on your blade. A few
sparks will come out when the grinder touches your blade. Keep the grinder wheel and tooth in contact for a while, then remove it. The inner surface of the tooth will now look shiny. Do this for all teeth.

 

A blunt chainsaw blade is a dangerously slow way to cut wood. You will use excessive energy and your chainsaw blade will spit out dust
instead of chips. Feel free to use the above guide, next time you want to
sharpen your chainsaw blade using an electric sharpener.

 

Rotary Tools: Cordless Vs Battery

Rotary tools are a practical choice for small projects like cutting in tight spaces, engraving, carving, and grout removal. They are great for the small-scale application because of the efficient power and convenient size. The rotary tools are either cordless of electric models. This tool isquite similar to the oscillating multi-tools but has a fixed spinning motion. Also, it operates at a high-speed, so the cutting action isn’t always the smoothest.

 

Here is a summary of the different types of rotary tools:

Cordless

The cordless rotary tools are the most portable and give greater freedom to use. They can operate anywhere on a job-site provided the battery pack is charged. It is great to quickly finish jobs that are out of reach of a convenient power source. However, the run-time of the cordless unit is limited. It is only possible to work while the battery holds enough charge give full power and performance. A typical total cost is in the region of 60 to 90 minutes, and a complete charge takes about 3 hours. Also, the cordless unit will be slightly heavier because it has to accept the extra weight of the lithium battery.

Electric

The more power rotary tools completely remove the concern of running out of power at an awkward moment. With a suitable power source in place, this device can run as long as needed. The power cord is usually in the region of 6-feet, so this gives a decent amount of freedom to move around. They are a practical choice for the lengthier or heavy-duty projects because of the ability to rely on constant power. Also, with no battery in place, the overall weight of the tool is lighter. This lowers the risk of fatigue for the user. A negative of this type of tool is having

limited access. Projects can only be completed within the length of the power cord. An extension cord can help to widen the functional area, but this isn’t always a convenient option.

 

Before you buy

Many factors should be considered when purchasing rotary tools. A significant point is the type of work to complete. The professional in need of a reliable tool for day-to-day jobs will need something more potent than wanting a hobbyist needs. The electric unit is preferred for those that demand constant power. A portable one isn’t practical for the long or heavy-duty jobs because the battery will need to be constantly recharged. But, for those working on a light home project, the cordless unit can fit the needs.

 

Electric Tools or Air Tools, Which One Is Best?

Do you want to purchase tools and don’t know where to start? Do you know the difference between electric tools and air-powered tools? If you want a comparison of these two tools, then this article is specifically designed for you. Every type of tool offers various benefits to its users. Electric tools normally use a battery or power plugs whereas air-powered tools use compressed air. The choice of tool that you want will be influenced by the specific need that the tool is meant to solve. This article will examine both the electric and air tools to help you make an informed purchasing decision

 

Factors to help you determine whether to purchase electric or air tools

 

-Cost

 

Spending a lot of money to purchase a tool would affect your company cash flow while spending less money might mean that you are not getting the best quality. It is important that you weigh between the cost of the tool and the benefits that it is going to bring into your company.

 

Air tools are less expensive compared to the electric tools. They are also more durable. But one trick with air tools is that they cannot be operated without an air compressor which is very expensive.

 

Electric tools need less investment. They have an inbuilt power supply and are expensive compared to the air tools. The good thing is that they do not require a compressor for them to operate.

 

-Portability

 

Electric tools are lighter and can easily be transported from one place to another. They can easily be used wherever there is an electric outlet nearby. It does not limit you as there is no compressor required compared to air tools.

 

Air tools are also portable because they do not have motors and this makes easier to operate. When connected to compressors they produce more power compared to electric tools.

 

Disadvantages of using air tools

 

-Initial cost: The air compressors used in the air tools are generally expensive. It is also hard to find a cheap second-hand compressor into the market.

 

-Air compressors: The compressors are very noisy and heavy.

 

-Maintenance; the cost of maintaining the compressor is high compared to that of the electric tool.

 

Disadvantages of electric tools

 

-They are generally expensive compared to air tools

 

-Electric power is required for them to operate

 

-Power cords are required just like air tools employ hoses

 

They cannot be interchanged as they are meant to be used for a single use.

 

Electric Tools or Air Tools, Which One Is Best?

 

Most professionals always employ both the electric and air-powered tools depending on the type of task and their power requirements. Finally, whether you purchase an electric or air tool should depend on the specific use of the tool.

 

References

 

https://www.garagejournal.com/forum/showthread.php?t=57790

 

https://www.garagetooladvisor.com/air-tools/air-tools-vs-electric-tools/

 

https://www.grainger.com/content/supplylink-different-types-of-power-tools

Hammer Drills – How to Buy the Right One

The choice of a hammer drill goes a long way in determining the quality of work you will do – as well as the time you will take. As such, the ultimate decision should not be taken lightly. Irrespective of how you intend to use the hammer drill, including DIY projects, you may use the following buying guide for the best hammer drill.

1. The Intended Use

Prospective users of hammer drills should first and foremost determine their reasons for wishing to make the purchase. It will be useless to buy a hammer drill that doesn’t serve its intended purpose with utmost accuracy. Note that various hammer drills are designed for performing different drilling jobs. For instance, there is a hammer drill for making holes on the ground, and others for the wall. Before investing your hard earned money on this tool, conduct a thorough background check on its uses. Understand what it can help you achieve, as well as the things it cannot do.

2. Type of hammer drill

Another critical consideration consumers should make has to do with the kind of hammer drill – when it comes to how it is powered. Hammer drills are available in both battery-powered and electric-powered forms. The battery powered ones are most suitable for DIY projects. However, if you intend to use the equipment on a construction site, consider the electric drills.

Hammer drills are also classified into either corded or cordless, and this categorization is equally important during the selection process. While they serve the same functions, cordless drills are more suitable for home users compared to the workers in the construction sites. When at crossroads between the corded and cordless drill, the amount of power needed to get the job done should be your guide.

Corded hammer drills are more powerful than the cordless hammer drills which means that they are appropriate for tough jobs. On the other hand, cordless drills are loved by many people due to their portability as well as ease of storage because they are smaller than the corded drills. Choose a cordless drill if you wish to work on wood, steel and plastic materials. If you are involved in masonry work, you are better off working with a corded hammer drill.

3. Speed of the hammer drill

Measured in RPMs, speed is an important feature when choosing the right hammer drill. Faster augers rotate quickly and are usually more efficient. If you are buying a hammer drill for your DIY projects, a speed of 1000 RMPs is sufficient. While this may be the case, a drill that allows you to vary the speed is undoubtedly the most appealing. Besides giving you absolute control, such hammer drills permit the highest level of accuracy and precision. This level of versatility means that you can handle a broad array of tasks using one hammer drill – at the right pace, and without causing damage that mostly emanates from the application of excessive force.

4. Safety features

The importance of safety in drilling works cannot be overemphasized. Some of the essential safety elements to look for in a hammer drill include;

· Two handles – one on the foremost part of the drill, and the other one at the end of the drill. The objective is to ensure stability when working with the tool.

· Ergonomic handles complete with a shock absorption technology to absorb both the vibration and the force originating from the drill motion. The last thing you want is aching muscles and numb fingers.

· Cut off switch – for bringing the drill motion to a halt upon the release of the trigger.

The above four tips should help eliminate the confusion and dismay associated with selecting the right hammer drill.